SC-7041 Porsche 911 RSR #18, 24H Nurburgring 2011

Scaleauto SC-7041 Porsche 911 RSR #18

Manthey racing entry, 24H Nurburgring 2011

Has SC-1333 ball bearings around front and rear axles. 

SC-0025 motor, 21,500 rpm and very torquey, geared 12/44. 

Stock guide is SC-1601.

We recommend SC-2421  sponge tires, glued, trued and ready to go, for racing on most surfaces.  If you plan to use the stock rubber tires you will need to glue them to the wheels.

Listing of useful parts for the 1/24 Scaleauto cars
Medium compound rubber rear tires SC-4737 
Soft compound rubber rear tires SC-4736 
Glued & trued sponge front tires on lightweight aluminum wheels SC-2715P these wheels can easily be fitted with the stock wheel inserts
Glued & trued sponge rear tires on lightweight sluminum wheels SC-2121p(supersoft), SC-2621p(soft), SC-2421p (medium), SC-2521P (hard) these wheels can easily be fitted with the stock wheel inserts
Guide spacer SC-1623  As stock on the 1/24 scale cars the guide is set for NINCO track with it's raised rails, if you will be running on Carrera or a routed wood track then you will find you need to shim the guide down to get fully in the slot. Or, and this is what we recommend, you can shift the guide from it's position atop the chassis plate to the bottom of the chassis plate, this is easily done as just four small screws hold the guide holder in place. If you choose to shift the guide carrier below the chassis plate then you will also want SC-1626 guide, this guide is a 'low profile' version of the stock guide.